#4970948
I get that these are a prototype and will have changes. To me there are a few things I'd point. Image attached to aid in the points raised

Image


Red Circle - This part of the boot on your prototype seems to cut off on a very clean edge whereas on the screen used boot it has a bit of a curved edge on it. Not sure on terminology.

Orange Circle - The prototype has the top eye let right at the very top past the stitch line. On the screen used boot there is no eye let past the top stitchline. The extra space made by having the curved side raised in point A might allow the eyelets to placed correctly.

Pink Circle - The toe cap on the screen used boots is just a stitchline it does not have the holes along the toe cap stitch line (I've used purple on the original and blue by the prototype)

Green Circle - The zipper is a lot thicker on these boots than what yours appear to be (this may be just the angle but beyond the zipper top when you get lower down the boot you can barely see the zipper which makes me wonder is the zipper too thin. The pull is also wrong.

As it stands now, these boots are no more accurate than modern Corcoran's based on the prototype. Hopefully these details can be picked up and I'm sure someone with a keener eye than me will be along soon.
Kingpin liked this

    Maybe the powers that be decided to save the cut s[…]

    I'm glad you brought up measurements being a tad o[…]

    I went with a pair of Rocky 2090 from eBay. Practi[…]

    Does anyone know if it's possible to get a replace[…]