- December 10th, 2021, 2:31 pm#4963217
Hi all! I only recently came across the 3D printable ghost trap plans, which I thought were awesome! On black Friday I picked up a Raspberry Pi Pico and decided to see if I could program some light sequences for it. I'd never written any micropython but it's so simple. I then added a sound box and have bought some servos. This is what I've come up with so far.
Its all internally powered with a lipo and the electronics so far have cost less than £10!
Still need to code the sound for the trap when it's open prior to capture, and sort the servos. (And get some proper sized screws!) Though I do keep looking at the e-cig setups and wondering if I should have a crack at that too!
Would love to hear your thoughts!
Rik,
Its all internally powered with a lipo and the electronics so far have cost less than £10!
Still need to code the sound for the trap when it's open prior to capture, and sort the servos. (And get some proper sized screws!) Though I do keep looking at the e-cig setups and wondering if I should have a crack at that too!
Would love to hear your thoughts!
Rik,
Last edited by Kingpin on December 11th, 2021, 1:22 am, edited 1 time in total.Reason: Added YouTube code