By GanglyOne
#4963012
I'm thinking that I'm going to make my own aluminum thrower from scratch. Are the drawings and measurements fairly accurate as far as anyone knows? I bought a Haslab Neutrona wand but not sure of accuracy.
User avatar
By Kingpin
#4963149
GAXIMO wrote: December 9th, 2021, 10:41 pm Dude sign me up for one! Maybe it will help pay for material costs etc. for your two!
This is not an interest thread, and GanglyOne has said he's just making a couple for personal use.
User avatar
By CPU64
#4970040
If you want some tips, don't cut the hole on top for the stem, easier to maintain the bend radius and you can just drill after for the knob screw.
Don't make the rear handle hole the size of the tube, I make a 7/8" hole with a unibit after box is welded together. The chance of burning through the way you have it is high.
    Proton Props UK

    I've seen that too...... Maybe, I don't know? Fu[…]

    Hasbro Ghostbusters

    While you're 100% correct about the function[…]

    Uniform Tips

    It does rain frequently here in London, but not to[…]

    The yellow parts are raw 3D prints, unsanded and u[…]